Filter
Top Products
23
Connecting Speakers
22
Speaker Audio Cable
Connect the speaker audio cable to the external speaker output jack on the rear of the PDP
matching the “+” and “-” ends of the cable with the diagram on the PDP.
How to Connect
Fix the bracket onto the guide pole located on the rear
of speaker and fasten the screws.
After removing the three screes on the PDP, clamp the
speaker and the PDP together and fasten the screws.
Connecting PDP and Speakers / Stand and Speakers
Connecting a VCR/Cable Box
S-Video Cable
Audio Cable
Video Cable
Connect Video/S-Video cable between the Video/S-Video Output jack on the VCR/Cable
box and the Video Input jack on the PDP.
• For better video, you can use a S-Video cable.
• You can attach the Ferrite Cores(supplied) to the both jacks of the Video cable.
Simply set the Ferrite Cores right under the jacks.
Connect an Audio cable between the Audio Output jack on the VCR/Cable box and the
Audio Input jack (Video) on the PDP.
Videotape Playback:
1. Turn on PDP and press the Video or S-Video(if S-Video jack is connected.) button on your
remote control.
2. Turn on your VCR, insert a videotape and press the Play button.
• For an explanation of Component video, see your VCR/Cable Box owner’s instruction.
How to Connect
Power Plug
1
2
1
2
• Stand and speakers
Guide
pole
Guide
pole
Guide
pole
✱ The speakers MUST have more than 7watts rating (impedance 8ohm).