Filter
Top Products
Connecting a PC
Connection to a Macintosh computer may require an adapter.
76
To watch the PC screen:
1. Turn on your PDP.
2. Press the SOURCE button on the remote control or SOURCE button on the front panel
to select “PC”.
3. Turn on your PC and check for PC system requirements. (Refer to pages 78 and 79 for PC
system requirements.)
4. Adjust the PC screen. (Refer to pages 80 and 82.)
Connecting a PC to the PDP
Audio CablePC CableDVI Cable
Power Plug
DVI jack
(The actual config-
uration on your PC
may be different,
depending on the
model.)
PDP
PC
or
Use a DVI-D
connection cable.
(sold separately)
Connect a PC (15pin) cable between the PC Output jack (or DVI jack) on the PC and the
RGB IN(or DVI IN) Input jack (15p D-SUB) on the PDP.
Connect a Audio cable between the Audio (RGB or DVI) on the PC and the Audio L/R (RGB
or DVI) input jacks on the PDP.
1
2