Filter
Top Products
Troubleshooting
4-16 Samsung Electronics
4-2 Adjustment
4-2-1 Service Instruction
" Before Performing After Sales Services
1. Check if the measurement and test equipment is working properly.
2. Secure sufficient work space for disassembling the product.
3. Prepare a soft pad for disassembling the product.
" Service adjustment item after replacement of Board
<If adjustment equipment is available>
# PDP Option of Factory Mode ) set the Factory Data Type item as the suitable value of relevant model.
$ Adjust Calibration of Factory Mode for each mode.
% Adjust White Balance of Factory Mode.
<If adjustment equipment is not available>
# Write down the value of HDMI White Balance of Factory Mode before replacing Board.
$ PDP Option of Factory Mode ) set the Factory Data Type item as the suitable value of relevant model.
% Set the value of HDMI White Balance with the value written down before.