Filter
Top Products
41
ENG
● AUDIO SETUP
Setting the Sound Edit
Press the
▲▼
buttons to select Sound Edit,
then press the ENTER or
►
button.
Press the
▲▼
buttons to select the desired Speaker,
then press the
◄►
button to adjust the settings.
When done, use the
▲▼◄►
buttons to select Save,
then press the ENTER button.
If you don’t want to save your settings, use the
▲▼◄►
buttons to select Cancel, then press the ENTER button.
Press the RETURN butt on to return to the previous menu.
Adjusting Front/Surround Speaker Balance
• You can select between 0, -6, and OFF.
• The volume decreases as you move closer to –6.
Adjusting Center/Surround/Subwoofer Speaker Level
• The volume level can be adjusted in steps from +6dB to
-6dB.
• The sound gets louder as you move closer to +6dB and
quieter as you get closer to -6dB.
Press the RED(A) button to run the test tone with
the screen as shown; It operates the same as a
normal test tone.
Press the RED(A) button again to stop running the
test tone and return to the previous screen.
DSP(Smart Sound) Function
This will regulate and stabilize the volume level against a drastic volume change when changing
channels or during a scene transition.
Press the DSP button.
Each time the button is pressed, the selection changes as
follows:
S.SOUND ON
➝
S.SOUND OFF
4.
5.
6.
M
M
•
AV Sync : 50msec
Test Tone
Speaker Distance
Sound Edit
►
System
Language
Audio
◄
Display
HDMI
Network
Parental
DVDDVD
Music
Photo
Setup
Music
Photo
Setup
AV Sync : 50msec
Test Tone
Speaker Distance
Sound Edit
►
System Setup
Language Setup
Audio Setup
◄
Display Setup
HDMI Setup
Network Setup
Parental Setup
DVDDVD
Sound Edit
Save Cancel
ReturnMove
▲
▼
Adjust
▲
▼
Test Tone
A
DVD
Dynamic Compression : On
AV Sync : 50msec
Test Tone
►
Speaker Distance
Sound Edit
System Setup
Language Setup
Audio Setup
◄
Display
Setup
HDMI
Setup
Network
Setup
Parental Setup
Music
Photo
Setup
Test Tone
Stop Return
A
Surround Left
USER
HT-BD1250A_XAA_0715-2.indd 41HT-BD1250A_XAA_0715-2.indd 41 2009-07-22 4:59:162009-07-22 4:59:16