Samsung HT-TX22 DVD Player User Manual


 
ENG
OPERATION
4140
CBI (Control/Bulk/Interrupt) is not supported.
Digital Cameras that use PTP protocol or require additional program installation when connected
to a PC are not supported.
A device using NTFS file system is not supported. (Only FAT 16/32 (File Allocation Table 16/32) file
system is supported.)
Some MP3 players, when connected to this product, may not operate depending on the sector size of their
file system.
The USB host function is not supported if a product that transfers media files by its manufacturer-
specific program is connected.
Does not operate with Janus enabled MTP (Media Transfer Protocol) devices.
The USB host function of this product does not support all USB devices. For information on
the supported devices, see page 63.
Supported Formats
You can enjoy media files such as pictures, movies and music saved on an MP3 player, USB memory stick or digital camera in
high quality video with 5.1 channel Home Theater sound by connecting the storage device to the USB port of the Home Theater.
Playing Media Files using the USB Host Feature
1 Connect the USB device to the USB port on the front of the unit.
2 Press the FUNCTION button on the DVD Player or the USB button
on the remote control to select the USB mode.
<USB> appears on the display screen and then disappears.
The USB MENU screen appears on the TV screen and the saved file is played.
3 To stop playback, press the STOP () button.
Safe USB Removal
To prevent damage to the memory stored in the USB device, perform safe removal before
disconnecting the USB cable.
(1) Press the STOP ( ) button twice in a row.
The display will show REMOVE USB.
(2) Remove the USB cable.
During playback, press the button.
When there is more than one file and you press the button, the next file is selected.
When there is more than one file and you press the button, the previous file is selected.
Skip Forward/Back
To play back the disc at a faster speed, press the button during playback.
Each time you press either button, the playback speed will change as follows:
2x 4x 8x 32x Normal.
Fast Playback
Compatible Devices
1. USB devices that support USB Mass Storage v1.0. (USB devices that operate as a removable disc
in Windows (2000 or later) without additional driver installation.)
2. MP3 Player: HDD and flash type MP3 players.
3. Digital camera: Cameras that support USB Mass Storage v1.0.
• Cameras that operate as a removable disc in Windows (2000 or later) without additional driver installation.
4. USB HDD and USB Flash Drive: Devices that support USB2.0 or USB1.1.
• You may experience a difference in playback quality when you connect a USB1.1 device.
• For a USB HDD, make sure to connect an auxiliary power cord to the USB HDD for proper operation.
5. USB card Reader: One slot USB card reader and Multi slot USB card reader.
• Depending on the manufacturer. the USB card reader may not be supported.
• If you install multiple memory devices into a multi card reader, you may experience problems.
6. If you use a USB extension cable, the USB device might not be recognized.
• To listen to your music files with 5.1 channel home theater sound, you must set the Dolby
Pro Logic II mode to Matrix. (See page 52)
File name
File
Bit rate Version Pixel
Sampling
extension Frequency
Still Picture JPG JPG .JPEG 640
x
480
Music
MP3 .MP3 80~384kbps 44.1kHz
WMA .WMA 56~128kbps V8 44.1kHz
VCD MPG.MPEG .DAT 1.5Mbps VCD1.1,VCD2.0 320x480 44.1KHz
Movie WMV .WMV 4Mbps V1,V2,V3,V7 720x480 44.1KHz~48KHz
DivX .AVI,.ASF 4Mbps DivX3.11~DivX5.1,XviD 720x480 44.1KHz~48KHz
X20(1~39P) NOGB 2007.4.12 12:52 PM Page 40