Filter
Top Products
ENG
SETUP
4948
• Depending on PRO LOGIC and STEREO settings, the speaker mode may vary
(see page 54).
Signal outputs and frequency responses from the speakers will automatically be adjusted according to your speaker
configuration and whether certain speakers are used or not.
1 In Stop mode, press the MENU button.
2
Press the Cursor button to move to <Audio> and then press the ENTER button.
3
In the
<SPEAKER SETUP>
, press the ENTER button again.
4 Press the Cursor , , , button to move to the desired speaker and then
press the ENTER button.
For C, SL, and SR, each time the button is pressed, the mode switches alternately as follows :
SMALL
➝
NONE.
For L and R, the mode is set to SMALL.
• SMALL : Select this when using the speakers.
• NONE : Select this when no speakers are connected.
Setting the Speaker Mode
Settings (Con’t)
Some DVD-Audio discs contain DVD-Video as well as DVD-Audio.
To play back the DVD-Video portion of the DVD-Audio disc, set the unit to DVD-Video mode.
1 Press the EJECT button and then press the MENU button.
2
Press the Cursor button to move to <Setup> and then press the ENTER button.
3
Press the Cursor button to move to <DVD TYPE> and then press the ENTER
button.
4 Press the Cursor , button to move to
<DVD VIDEO>
and then press the
ENTER button.
Set steps 1 ~ 4 again if you want to switch to DVD AUDIO Play mode.
When Selecting DVD Play Mode:
•
DVD VIDEO : set to play the DVD video contents contained on a DVD audio disc.
• DVD AUDIO : set to play the default DVD audio.
DVD Playback Mode
• DVD Play mode is set to DVD Audio as factory default setting.
• Powering off the main unit will automatically switch to the DVD Audio mode.
Please use the Registration code to register this player with the DivX (R) video on demand format.
To learn more, go to www.divx.com/vod.
DivX (R) registration
• Powering off the main unit will automatically switch to the SACD mode.
If the SACD is a HYBRID disc, you can play the disc in CDDA MODE as well.
1 Press the EJECT button and then press the MENU button.
2
Press the Cursor button to move to <Setup> and then press the ENTER button.
3 Press the Cursor button to move to <SACD TYPE> and then press the
ENTER button.
4 Press the Cursor , button to move to <SACD MODE> and then press the
ENTER button.
Set steps 1 ~ 4 again if you want to switch to CDDA Play mode.
• SACD MODE : Set this mode to play SACD.
• CDDA MODE : Set this mode to play CDDA contents included in a disc.
SACD Playback Mode
MOVE ENTER EXITRETURN
MOVE ENTER EXITRETURN
MOVE ENTER EXITRETURN
MOVE ENTER EXITRETURN
MOVE ENTER EXITRETURN
MOVE ENTER EXITRETURN