Filter
Top Products
English - 27
Setting the PC
Coarse and Fine Tuning of the Image (Image Lock):
The purpose of picture quality adjustment is to remove or
reduce picture noise.
If the noise is not removed by Fine-tuning alone, then adjust
the frequency as best as possible (coarse) and Fine-tune again.
After the noise has been reduced, re-adjust the picture so that
it is aligned on the center of screen.
1. Preset: Press the SOURCE
button to select PC mode.
2. Press the MENU
button to display the menu.
Press the ▲ or ▼ button to select "Setup", then press the
ENTER button.
3. Press the ▲ or ▼ button to select "PC", then press the
ENTER button.
4. Press the ENTER
button to select "Image Lock".
5. Press the
▲ or ▼ button to select "Coarse" or "Fine", then
press the ENTER button.
6. Press the
◄
or
►
button to adjust the screen quality.
Press the ENTER button.
7. Press the EXIT
button to exit.
Changing the Image Position:
Adjust the PC’s screen positioning if it does not fit the
TV screen.
1. Follow the "Coarse and Fine Tuning of the Image
(Image Lock)" instructions number 1 to 3.
2. Press the ▲ or ▼ button to select "Position", then press the
ENTER
button.
3. Press the ▲ or ▼ button to adjusting the Vertical-Position.
Press the
◄
or
►
button to adjust the Horizontal-Position.
Press the ENTER button.
4. Press the EXIT
button to exit.
Initializing the Image Settings (Image Reset):
You can replace all image settings with the factory default
values.
1. Follow the "Coarse and Fine Tuning of the Image
(Image Lock)" instructions number 1 to 3.
2. Press the ▲ or ▼ button to select "Image Reset", then press
the ENTER button.
3. Press the EXIT
button to exit.
Adjusting the PC Screen Automatically (Auto Adjustment):
Auto adjustment allows the PC screen of set to self-adjust to
the incoming PC video signal. The values of fine, coarse and
position are adjusted automatically.
1. Follow the "Coarse and Fine Tuning of the Image
(Image Lock)" instructions number 1 to 3.
2. Press the ▲ or ▼ button to select "Auto Adjustment", then
press the ENTER button.
3. Press the EXIT
button to exit.
Setup
Plug & Play
Language
Time
Blue Screen
PC
Move Enter Return
PC
Image Lock
Position
Image Reset
Auto Adjustment
Move Enter Return
Image Lock
Move Enter Return
Coarse
Fine
1680
83
PC
Image Lock
Position
Image Reset
Auto Adjustment
Move Enter Return
Position
Adjust Enter Return
PC
Image Lock
Position
Image Reset
Auto Adjustment
Move Enter Return
PC
Image Lock
Position
Image Reset
Auto Adjustment
Move Enter Return
BN68-01287A-01Eng-0528.indd 27 2007-05-30 �� 8:35:24