Filter
Top Products
English-15
This feature adjusts the brightness of TV so as to reduce the power
consumption. When you watching TV at night, set the "Energy Saving "
mode option to "High" so as to reduce the dazzling of your eyes as well
as the power consumption.
1. Press the MENU button to display the on-screen menu.
Press the
or button to select “Setup”, then press the
ENTER button.
2. Press the or button to select “Energy Saving”,
then press the
ENTER button.
3. Select the required option (Off, Low, Medium, High) by pressing
the
or button.
Press the
ENTER button.
4. Press the EXIT button to exit.
This function does not work in PC mode.
Using the Energy Saving Feature
Blue Screen:
If no signal is being received or the signal is very weak, a blue screen
automatically replaces the noisy picture background. If you wish to
continue viewing the poor picture, you must set the "Blue Screen"
mode to "Off".
Melody:
You can hear melody sound when the television is powered on or off.
1. Press the MENU button to display the menu. Press the or button to
select “Setup”, then press the
ENTER button.
2. Press the or button to select “Blue Screen” or “Melody”.
Press the
ENTER button.
3.
Press the or button to select “On” or “Off”.
Press the
ENTER button.
4. Press the EXIT button to exit.
Setting the Blue Screen Mode / Selecting the Melody
You can select among external sources connected to
your TV’s input jacks.
1. Press the MENU button to display the menu.
Press the
ENTER button, to select “Input”.
2. Press the ENTER button again, to select “Source List”.
When no external device is connected to your set, only “TV”, “Ext.1”, “Ext.2”
are activated in the “Source List”. “AV”, “S-Video”, “Component”, “PC”, “DVI”
are activated only when they are connected to your set.
3. Select the required device by pressing the or button.
Press the
ENTER button.
Selecting the Source
Press the SOURCE button on the remote control to toggel between all the available
source. TV mode can be selected by pressing the
TV or P / button on the
remote control but you cannot select it by pressing the
SOURCE button.