122
Screen Saver
―
Period (Hour) and Time (Sec) can be configured when Repeat is
selected.
―
Start Time and End Time can be configured when Interval is selected.
This function prevents screen burn-in when the screen of the selected display device is left idle for an extended period of time.
Timer: You can set the timer for Screen Saver.
•
Off
•
Repeat: Display the image retention-preventive pattern set in Mode at specified time intervals (Period).
•
Interval: Display the image retention-preventive pattern set in Mode for a specified period of time (from Start Time to
End Time).
•
Mode: Select a screen protective pattern to display.
•
Period (Hour): Specify the time interval to activate the Screen Saver function.
―
The option is enabled when Repeat is selected for Timer.
•
Time (Sec): Specify the duration to keep the Screen Saver function on.
―
The option is enabled when Repeat is selected for Timer.
•
Start Time: Set start time to display screen saver.
―
The option is enabled when Interval is selected for Timer.
•
End Time: Set end time to display screen saver.
―
The option is enabled when Interval is selected for Timer.