Filter
Top Products
30
English
Using the Menus
Setup Menu
Setup
Option Description
Menu Language
You can set the menu language.
Time Clock
Setting the clock is necessary in order to use the various timer
features of the TV. If you disconnect the power cord, you have
to set the clock again.
Clock Mode
You can set up the current time manually or automatically.
Auto: Set the current time automatically using the time
from the digital broadcast.
Manual: Set the current time to a manually specified time.
Clock Set
You can set the current time manually.
This function is only available when Clock Mode is set
to Manual.
You can set the day, month, year, hour and minute
directly by pressing the number buttons on the remote
control.
Sleep Timer
The sleep timer automatically shuts off the TV after a preset
time (30, 60, 90, 120, 150 and 180 minutes).
To cancel the Sleep Timer function, select Off.
Timer 1 / Timer 2 / Timer 3
Three different on / off timer settings can be made.
You must set the clock first.
On Time
Set the hour, minute, and activate / inactivate.
(To activate timer with the setting you’ve chosen, set to
Activate.)
Off Time
Set the hour, minute, and activate / inactivate.
(To activate timer with the setting you’ve chosen, set to
Activate.)
Volume
Set the desired volume level.
Source → TV / USB
You can select the TV or USB device content to be played
when the TV is turned on automatically. Select TV or USB.
(Make sure that an USB device is connected to your TV.)
Antenn
a (when TV / USB is set to TV)
Select ATV or DTV.
Cha
nnel (when TV / USB is set to TV)
Select the desired channel.
Musi
c or Photo (when TV / USB is set to USB)
Contents (when Source is set to USB) You can select
a folder on the USB Device with music or photo files to
be played when the TV turns on automatically.
If the folder name is too long, the folder can not be
selected.
If the folder name to be configured by the Contents
function is too long, it cannot be selected.
Repeat
Select Once, Everyday, Mon~Fri, Mon~Sat, Sat~Sun or
Manual.
When Manual is selected, press the ► button to select
the desired day of the week. Press the ENTERE button
over the desired day and the c mark will appear.
You can set the hour, minute and channel by pressing the
number buttons on the remote control.
❑
■
■
❑
■
❑
■
■
■
■
■
Auto Power Off
When you set the timer on, the
TV will be eventually turned off,
if no controls are operated for 3
hours after the TV was turned on
by the timer. This function is only
available in timer on mode and
prevents overheating, which may
occur if a TV is on for too long
time.
■
The current time will appear
every time you press the INFO
button.
■
Depending on the broadcast
station and signal, the auto time
may not be set correctly. If this
occurs, set the time manually.
The Antenna or cable must be
connected in order to set the time
automatically.
■
■
Press the TOOLS button to
display the Tools menu. You
can also set the sleep timer by
selecting Tools → Sleep Timer.
■
When there is only one photo file
in the USB, the Slide Show will
not play.
■
Plug & Play
Menu Language : English ▶
Time
Broadcast
Security
General
Setup
On Time
L
Move
U
Adjust
E
Enter
R
Return
Timer 1
Off Time
Volume
00 00 Inactivate
00 00 Inactivate
10
Contents
Repeat
Once
Sun Mon Tue Wed Thu Fri Sat
TV ATV 1
BN68-02315G-01Eng.indd 30 2009-06-08 �� 11:00:26