Filter
Top Products
English - 29
Problem Possible Solution
The picture appears distorted in the
corner of the screen.
If Screen Fit is selected with some external devices, the picture may appear distorted in
the corner of the screen. This symptom is caused by the external devices, not TV.
The ‘Resets all settings to the
default values.’ message appears.
This appears when you press and hold the EXIT button for a while. The product settings
are reset to the factory defaults.
You may see small particles if you
look closely at the edge of the bezel
surrounding the TV screen.
This is part of the product’s design and is not a defect.
This TFT LCD panel uses a panel consisting of sub pixels (3 133 440) which require sophisticated technology to produce.
However, there may be few bright or dark pixels on the screen. These pixels will have no impact on the performance of the
product.
WallMountKitSpecications(VESA)
Install your wall mount on a solid wall perpendicular to the oor. When attaching to other
building materials, please contact your nearest dealer. If installed on a ceiling or slanted wall, it
may fall and result in severe personal injury.
Standard dimensions for wall mount kits are shown in the table above.
When purchasing our wall mount kit, a detailed installation manual and all parts necessary
for assembly are provided.
Do not use screws longer than the standard dimension, as they may cause damage to the
inside of the TV set.
For wall mounts that do not comply with the VESA standard screw specications, the
length of the screws may differ depending on their specications.
Do not use screws that do not comply with the VESA standard screw specications.
Do not fasten the screws too strongly, this may damage the product or cause the product to fall, leading to personal injury.
Samsung is not liable for these kinds of accidents.
Samsung is not liable for product damage or personal injury when a non-VESA or non-specied wall mount is used or the
consumer fails to follow the product installation instructions.
Our 57” and 63” models do not comply with VESA Specications. Therefore, you should use our dedicated wall mount kit for
this model.
Do not exceed 15 degrees tilt when mounting this TV.
Product Family inches VESA Spec. (A * B) Standard Screw Quantity
LCD-TV
19 ~ 22 100 x 100
M4
4
23 ~ 29 200 x 100
30 ~ 40 200 x 200 M6
46 ~ 55 400 x 400
M857 ~ 70 800 x 400
80 ~ 1400 x 800
PDP-TV
42 ~ 50 400 x 400
M8 4
58 ~ 63 600 x 400
70 ~ 800 x 400
80 ~ 1400 x 800
LFD
30 ~39 200 x 200 M6
4
40 ~ 52 400 x 400
M855 ~ 70 800 x 400
70 ~ 1400 x 800
Do not install your Wall Mount Kit while your TV is turned on. It may result in personal injury due to electric shock.
N
¦
N
N
N
N
N
N
N
N
N
Book_650_BN68-02151A-00L02.indb 29 2009-03-13 �� 9:22:48