Filter
Top Products
English - 7
Memorizing the Channels
Selecting the Video Signal-source
Before your television can begin memorizing the available channels, you
must specify the type of signal source that is connected to the TV (i.e. an Air
or a Cable system).
1.
Press the MENU button to display the menu.
Press the ▲ or ▼ button to select Channel, then press the ENTERE
button.
2.
Press the ENTERE button to select Antenna.
Press the ▲ or ▼ button to select Air, STD, HRC, IRC or Cable,
then press the ENTERE button.
Press the EXIT button to exit.
Storing Channels in Memory (Automatic Method)
First, select the correct signal source (Air, STD, HRC or IRC).
1.
Press the MENU button to display the menu.
Press the ▲ or ▼ button to select Channel, then press the ENTERE
button.
2.
Press the ▲ or ▼ button to select Auto Program, then press the
ENTERE button.
If a channel is locked using the Child Lock function, the PIN input window
appears.
3.
Press the ▲ or ▼ button to select the antenna connection, then press
the ENTERE button.
STD, HRC and IRC identify various types of cable TV systems. Contact your local cable company to identify the type of
cable system that exists in your particular area. At this point, the signal source has been selected.
The TV automatically cycles through all of the available channels and stores them in memory. This takes about one to two
minutes.
Press the ENTERE button at any time to interrupt the memorization process and return to the Channel menu.
4.
The TV begins memorizing all available stations.
To stop the search before it has nished, press the ENTERE button with Stop selected.
5.
After all the available channels are stored, the Auto Program menu reappears.
Press the EXIT button to exit.
N
N
N
N
N
Picture
Sound
Channel
Setup
Input
Antenna :
Air
�
Auto Program �
Channel List �
F
ine Tune
�
Color System :
Auto
�
UMove EEnter RReturn
TV
Channel
Picture
Sound
Channel
Setup
Input
Antenna :
Air
�
Auto Program �
Channel List �
F
ine Tune
�
Color System :
Auto
�
UMove EEnter RReturn
TV
Channel