Filter
Top Products
Manual de resumen:
Use the HDMI IN 2 jack for DVI connection to an external device. Use a DVI to HDMI cable or DVI-HDMI adapter ! KEnSInGton loCK(depending on the
model) (DVI to HDMI) for video connection and the The Kensington lock (optional) is a device used to DVI IN (HDMI2) [R-AUDIO-L] jacks for audio.
physically fix the system when used in a public place. If you - When using an HDMI/DVI cable connection, you must use want to use a locking device, contact
the dealer where you the HDMI IN 2 jack. purchased the TV. 4 ant In Connects to an antenna or cable TV system. 5 SErVICE - Connector for SERVICE only.
- Connect this to the jack on the optional wall mount bracket. This will allow you to adjust the TV viewing angle using your remote control. The location of the
kensington lock may be different depending on its model.
English - Remote Control You can use the remote control up to a distance of about 23 feet from the TV. 1POWER Turns the TV on and off. 2TV Selects the TV
mode directly. 3NUMERIC BUTTONS Press to change the channel. 4 Use to select a channel over 100.
For example, for channel 122, press " ", then "2", then "2". 5 (MUTE) Press to temporarily cut off the sound. 6VOL / VOL Press to increase or decrease the
volume. 7CH LIST Used to display Channel Lists on the screen. 8 TOOLS Use to quickly select frequently used functions.
9 INFO Press to display information on the TV screen. 0COLOR BUTTONS Use these buttons in the Channel list and WISELINK, etc. !CC Controls the
caption decoder. @E.MODE Press to select the optional display and sound modes for sports, cinema and games. # se these buttons in the U WISELINK and
Anynet+ modes. : This remote can be used ( to control recording on Samsung recorders with the Anynet+ feature) $SOURCE Press to display and select the
available video sources. %PRE-CH Tunes to the previous channel. ^ CH / CH Press to change channels. & MENU Displays the main on-screen menu.
*W.LINK This function enables you to view and play photo and music files from an external device. (Refer to pages 46 (Photo) and 49 (Music)) (RETURN
Returns to the previous menu. ) UP / DOWN / LEFT / RIGHT / ENTER Use to select on-screen menu items and change menu values. a EXIT Press to exit the
menu. b P.MODE Picture effect selection. c MTS Press to choose stereo, mono or Separate Audio Program (SAP broadcast). dFAV.CH Not available.
e P.SIZE Picture size selection. The performance of the remote control may be affected by bright light. English - Installing batteries in the remote Control 1.
Lift the cover at the back of the remote control upward as shown in the figure.
2. Install two AAA size batteries. Make sure to match the "+" and "" ends of the batteries with the diagram inside the compartment. 3. Replace the cover.
Remove the batteries and store them in a cool, dry place if you won't be using the remote control for a long time. If the remote control doesn't work, check the
following: 1. Is the TV power on? 2. Are the plus and minus ends of the batteries reversed? 3. Are the batteries drained? 4. Is there a power outage or is the
power cord unplugged? 5. Is there a special fluorescent light or neon sign nearby? Connections Connecting Vhf and uhf antennas If your antenna has a set of
leads that look like the diagram to the right, see "Antennas with 300 Flat Twin Leads" below. If your antenna has one lead that looks like the diagram to the
right, see "Antennas with 75 Round Leads". If you have two antennas, see "Separate VHF and UHF Antennas". Antennas with 300 Flat Twin Leads If you are
using an off-air antenna (such as a roof antenna or "rabbit ears") that has 300 twin flat leads, follow the directions below.
1. Place the wires from the twin leads under the screws on a 300-75 adapter (not supplied). Use a screwdriver to tighten the screws. 2. Plug the adaptor into
the ANT IN terminal on the back of the TV. ANT IN Antennas with 75 Round Leads 1. Plug the antenna lead into the ANT IN terminal on the back of the TV.
ANT IN Separate Vhf and uhf antennas If you have two separate antennas for your TV (one VHF and one UHF), you must combine the two antenna signals
before connecting the antennas to the TV. This procedure requires an optional combiner-adaptor (available at most electronics shops). 1.
Connect both antenna leads to the combiner. uhf Vhf 2. Plug the combiner into the ANT IN terminal on the bottom of the rear panel..
Tus instrucciones
SAMSUNG LN40C530
Powered by TCPDF (www.tcpdf.org)