Filter
Top Products
English-26
OPERATION
Setting the Blue Screen Mode
If no signal is being received or the signal is very weak, a blue screen automatically
replaces the noisy picture background.
If you wish to continue viewing the poor picture, you must set the “Blue screen”
mode to “Off”.
1
Press the MENU button
to display the menu.
Press the
UP/DOWN buttons
to select “Setup”, then
press the ENTER
button.
2
Press the
UP/DOWN buttons
to select “Blue Screen”,
then press the
ENTER button.
3
Press the
UP/DOWN buttons
to set Blue Screen
“On” or “Off”.
Press the EXIT button to
exit.
Pressing the UP/DOWN
buttons will alternate between
“On” and “Off ”.
BN68-00633A-00Eng 2.qxd.q 3/22/04 4:05 AM Page 26