Filter
Top Products
English-24
OPERATION
2
Press the
UP/DOWN
buttons to select
“MTS”, then press
the ENTER button.
1
Press the MENU button
to display the menu.
Press the
UP/DOWN buttons
to select “Sound”, then
press the ENTER
button.
To select the Sound option
The sound settings can be adjusted to suit your personal preference.
(Alternatively, you can use one of the “automatic” settings. See the previous page.)
Depending on the particular program being broadcast, you can listen to stereo,
mono, or a Separate Audio Program. (SAP audio is usually a foreign-language
translation. Sometimes SAP has unrelated information like news or weather.)
3
Press the
UP/DOWN
buttons to select
“Mono”, “Stereo” or
“SAP”, then press the
ENTER button.
Press the EXIT button
to exit.
• Choose Mono for channels that are broadcasting in mono, or
if you are having difficulty receiving a stereo signal.
• Choose Stereo for channels that are broadcasting in stereo.
• Choose SAP to listen to the Separate Audio Program, which is
usually a foreign-language translation.
You can also change the MTS setting by pressing the “MTS” button
on the remote control. (When you change channels, MTS is set to “Stereo”
automatically. To listen in ‘SAP’ or ‘Mono’, change the MTS setting.)
In other modes except RF, only Mono and Stereo can be selected.
BN68-00633A-00Eng 2.qxd.q 3/22/04 4:05 AM Page 24