Filter
Top Products
English-14
Plug & Play
When the set is initially powered ON, you are automatically presented
with a series of basic customer settings.
The following settings are available.
1
If the set is in standby mode, press the
POWER
button
on the remote control.
Result
: The message
Plug & Play
is displayed.
It appears for a little while, and then the
Language
menu is automatically displayed.
2
Select the appropriate
Language
by pressing the or button.
The available languages are listed
.
You can choose one of 12 languages.
3
Press the
ENTER
button to confirm your choice.
Result
: The message
“Check antenna input.”
is displayed with
OK
selected.
4
Press the
ENTER
button.
Result
: The country menu is displayed:
Belgium - Germany - Spain - France - Italy -
Netherlands - Switzerland - Sweden - United
Kingdom - Eastern Europe - Others
5
Select your
Country
by pressing the or button.
Press the
ENTER
button.
Result
: The
Auto Store
menu is displayed.
6
Press the
ENTER
button.
Result
: The channel search will start and end automatically.
To stop the search before it has finished, press the
ENTER
button with
Stop
selected.
7
Press the
ENTER
button.
Select the
Hour
or
Minute
by pressing the or button.
Set the
Hour
or
Minute
by pressing the or button.
(Refer to “
Setting the Clock
” on page
30
)
8
Press the
MENU
button to confirm your setting.
Result
: The message “
Enjoy your viewing”
is displayed,
and then the channel which has been stored will be
activated.
9
Press the
EXIT button to exit
.
02-BN68-00969A-00Eng.qxd 8/10/05 3:29 PM Page 14