Filter
Top Products
SETUP
41 42
Setting the DRC (Dynamic Range Compression)
You can use this function to enjoy Dolby Digital sound when watching movies at
low volume at night.
1
2
Press MENU button.
Press Cursor button to
move to ‘Audio’ and then
press ENTER button.
3
4
If “DRC” is
selected, press
ENTER.
Press Cursor , to
adjust the ‘DRC’.
Press RETURN button to return to the previous level.
Press MENU button to exit the setup screen.
DISC SKIP ZOOM SLOW
REPEAT REMAIN SUB TITLE
TUNER
VOLUME
M
UTE
MENU
INFO
RETURN
SOUND
MODE
AUDIO
TIMER/CLOCK
TIMER ON/OFF
LOGO SLIDE MODE
NTSC/PAL
CANCEL DIGEST
STEP
TUNER
MEMORY
P.SCAN
TUNING
TAPE AUX
BAND
SLEEP DIMMER
DECK 1/2
MONO/ST
•
The more times the Cursor button is pressed,
the greater the effect, and the more times Cursor
button is pressed, the smaller the effect.
Press RETURN button to return to the previous level.
AV SYNC Setup
Press RETURN button to return to the previous level.
Press MENU button to exit the setup screen.
•
'Audio' menu appears.
21
•
Setup menu appears.
•
AV-SYNC screen appears.
3
Press Cursor , buttons
to move to ‘Audio’ and then
press ENTER button.
Press Cursor , buttons
to move to ‘AV-SYNC’ and
then press ENTER button.
Press the MENU button.
4
•
You can set the audio delay time between 0 ms
and 300 ms. Set it to the optimal status.
Press Cursor , buttons
to select the Delay Time of
AV-SYNC and then press the
ENTER button.
Video may look slower than the audio if it is connected with digital TV.
In this case, adjust the delay time of audio to optimal status to fit the video.