Filter
Top Products
Briefly press to
increase or decrease the
frequency incrementally.
Manual Tuning
Press
button
to select the preset station.
Press and hold button
to automatically search the
band.
Automatic Tuning 1
Automatic Tuning 2
43 44
Listening to Radio
You can listen to the chosen band (FM, MW, (LW),(SW1,2) broadcast stations)
by using either the automatic or manual tuning operation.
Presetting Stations
2
1
•
The selection toggles back
and forth between "FM
➝
MW
➝
(LW)
➝
(SW1,2)" each time
the TUNER(BAND) button is
pressed.
Tune in to the
desired station.
DISC SKIP ZOOM SLOW
REPEAT REMAIN SUB TITLE
TUNER
VOLUME
MUTE
MENU
INFO
RETURN
SOUND
MODE
AUDIO
TIMER/CLOCK
TIMER ON/OFF
LOGO SLIDE MODE
NTSC/PAL
CANCEL DIGEST
STEP
TUNER
MEMORY
P.SCAN
TUNING
TAPE AUX
BAND
SLEEP DIMMER
DECK 1/2
MONO/ST
Press TUNER/
BAND button.
21
Select a broadcast
station.
Press the STOP ( )
button to select
PRESET and then press
button to select the preset station.
Automatic Tuning 1
Press the Function
button to select the
desired band (FM,
MW,(LW),(SW1,2)).
Press the STOP
( )
button
to select "AUTO" and then
press button or turn Multi-Jog
knob to automatically search the band.
Automatic Tuning 2
Press STOP
( )
to select
MANUAL and then briefly
press to tune in to a lower or
higher frequency.
Manual Tuning
•
Each time the button is pressed, the sound switches between "STEREO" and "MONO".
•
In a poor reception area, select MONO for a clear, interference-free broadcast.
Press MO/ST button to listen in Mono/Stereo.
(This applies only when listening to an FM station.)
To tune in to a preset station, press on the
remote control to select a channel.
•
Refer to Step 2 on page 43 to
automatically or manually tune in
to a station.
21
•
Each time the button is pressed,
the band switches between
"FM
➝
MW
➝
(LW)
➝
(SW1,2)".
•
“PROG” flashes in the
display.
3
Example: Presetting FM 89.1 in the memory
Press to
select "89.10".
Press the
TUNER(BAND)
button and select
the FM band.
•
Press the TUNER MEMORY button before
‘
PROG
’ disappears from the display.
•
‘
PROG
’ disappears from the display and
the station is stored in memory.
54
•
You can select between 1 and
15.
Press the TUNER
MEMORY button.
Press the TUNER
MEMORY button.
6
To preset another
station, repeat
steps 2 to 5.
Press to
select preset
number.
Remote Control Unit
Main Unit
You can store up to:
15 FM stations
15 AM stations
15 FM stations
8 AM(MW) stations
7 LW stations
15 FM stations
5 MW stations
5 SW1 stations
5 SW2 stations
• FM Frequency Modulation
• AM(MW) Medium Wave
• LW Long Wave
RADIO OPERATION
OPTION
OPTION
OPTION
MHz