121
Wired Network Settings
Set the network connection to use Internet services such as perform software upgrades.
Automatic Network Settings
Connect to the network using a LAN cable.
Make sure a LAN cable is connected first.
How to set up automatically
1
Go to the Network Settings screen. Select Start, press E, and then press E again.
2
The network test screen appears and verifies the network connection.
When the connection has been verified, the “Wired network and Internet connection completed.” message appears.
―
If the connection process fails, check the LAN port connection.
―
If the automatic process cannot find the network connection values or if you want to set the connection manually, go to the next section, network setup.