Filter
Top Products
22
Reverse Side
―
The color and shape of parts may differ from what is shown. Specifications are
subject to change without notice to improve quality.
DP OUT RGB IN RJ45
IR /
AMBIENT
SENSOR IN
RS232C IN
RS232C
OUT
AUDIO
OUT
USB
DP IN
HDMI IN 1
DVI IN /
MAGICINFO IN
RGB / DVI /
HDMI / AV /
COMPONENT
/ AUDIO IN
HDMI IN 2
COMPONENT IN
OUT
IR
POWER
ANT IN
Port Description
RS232C IN
Connects to MDC using an RS232C-stereo adapter.
RS232C OUT
IR / AMBIENT SENSOR IN
Supplies power to the external sensor board or receives the light sensor signal.
AUDIO OUT
Connects to the audio of a source device.
RGB / DVI / HDMI / AV / COMPONENT /
AUDIO IN
Receives sound from a PC via an audio cable.
USB
Connect to a USB memory device.
DP IN
Connects to a PC using a DP cable.
HDMI IN 1, HDMI IN 2
Connects to a source device using an HDMI cable.
DVI IN / MAGICINFO IN
DVI IN: Connects to a source device using a DVI cable or HDMI-DVI cable.
MAGICINFO IN: To use MagicInfo, make sure to connect the DP-DVI cable.
DP OUT
Connects to another product using a DP cable.
ANT IN
Connect to an antenna cable.
RGB IN
Connects to a source device using a D-SUB cable.
AV IN / COMPONENT IN
Connects to a source device using the AV/Component adapter.
IR OUT
Receives the remote control signal via the external sensor board and outputs the
signal via LOOP OUT.
RJ45
Connects to MDC using a LAN cable.