Filter
Top Products
139
Network
7
7 Network
Delete: Deletes the devices from the list.
This function only deletes the name of the device from the list. If the deleted device is turned on or
tries to connect to the product, it may appear on the list again.
Using the Media Function
An alarm window appears informing you that media contents (videos, photos, music) sent from a mobile
phone will be displayed on your product. The contents are played automatically 3 seconds after the alarm
window appears. If you press the RETURN or EXIT button when the alarm window appears, the media
contents are not played.
The first time a device accesses your product through the media function, a warning popup
window appears. Press the [ ] button to select Allow. This permits the phone to access the
product freely and use the Media function to play content.
To turn off media contents transmissions from a mobile phone, set Media to Off in the AllShare
Settings.
Contents may not play on your product depending on their resolution and format.
The [ ] and / buttons may not work depending on the type of media content.
Using the mobile device, you can control the media play. For details, refer to each mobile’s user’s
guide.
7.4 MagicInfo Lite Settings
MENU Network MagicInfo Lite Settings ENTER[]
1 Server
Setting the MagicInfo Lite server IP
Enter the server IP address and port number.
Use 7001 as the port number.
If unable to connect to the server using port number 7001, check with your server
administrator to find the correct port number and then change the port number.
FTP Mode
Select an FTP operating mode: Active or Passive.
Default Storage
Specify the default memory to save schedules or content sent from the server to.
If the default storage space is set to USB, a schedule will not run if a USB device is not
connected.
Send a notification message to the server when internal memory is used up.
2 Storage
O
m