Filter
Top Products
32
Preparations
1
1 Preparations
1.2.5 Connection Using an IR Stereo Cable
Controlling more than one display product using your remote control
z Connect the [IR OUT] port on the product to the [IR / AMBIENT SENSOR IN] port on the other
display product using the dedicated stereo cable.
z A command sent from the remote control pointed at product will be received by both display
products and .
Ensure that you use the dedicated stereo cable provided with the product.
The appearance may differ depending on the product.
Controlling more than one display product using an external sensor kit (sold separately)
z A command sent from the remote control pointed at product (to which the external sensor kit is
connected) will be received by both display products and .
Ensure that you use the dedicated stereo cable provided with the product.
The appearance may differ depending on the product.
12
IR/
AMBIENT
SENSOR IN
IR OUT
IR/
AMBIENT
SENSOR IN
IR OUT
1
1
2
POWER
SOURCE
1 2
IR/
AMBIENT
SENSOR IN
IR OUT
IR/
AMBIENT
SENSOR IN
IR OUT
1
1
2