Filter
Top Products
52
Preparations
1
1 Preparations
Video Wall Mode Control
z Function
Video Wall mode can be activated on a TV/monitor using a PC.
This control is only available on a TV/monitor whose Video Wall is enabled.
This function is not available in MagicInfo.
z Viewing video wall mode (Get Video Wall Mode)
z Setting the video wall (Set Video Wall Mode)
"Video Wall Mode": A code used to activate Video Wall mode on a TV/monitor
1: Full
0: Natural
z Ack
"Video Wall Mode": A code used to activate Video Wall mode on a TV/monitor
z Nak
"ERR": A code showing what error has occurred
Header Command
ID
Data length
Checksum
0xAA 0x5C 0
Header Command
ID
Data length Data
Checksum
0xAA 0x5C 1
"Video Wall
Mode"
Header
Command
ID
Data length Ack/Nak r-CMD Val1
Checksum
0xAA 0xFF 3 ‘A’ 0x5C
"Video Wall
Mode"
Header
Command
ID
Data length Ack/Nak r-CMD Val1
Checksum
0xAA 0xFF 3 ‘N’ 0x5C "ERR"