Filter
Top Products
47
Using "PCoIP"
2
2 Using "PCoIP"
Ping Tab
The Ping page allows you to ping a device to see if it is reachable across the IP network. This may help
you determine if a host is reachable. As a result of firmware releases 3.2.0 and later forcing the “do not
fragment” flag in the ping command, you can use this feature to determine the maximum MTU size.
Figure 2-18: Ping
z Ping Settings
Destination
IP Address or FQDN to ping
Interval
Interval between ping packets
Packet Size
Size of the ping packet
z Packets
Sent
Number of ping packets transmitted
Received
Number of ping packets received