Filter
Top Products
English - 15
PICTURE CONTROL
ConguringthePictureMenu(TV/AV/Component/HDMI) ¦
Mode ❑
You can select the type of picture which best corresponds to
your viewing requirements.
Dynamic
Selects the picture for increased denition in a bright room.
Standard
Selects the picture for the optimum display in a normal
environment.
Movie
Selects the picture for viewing movies in a dark room.
Backlight ❑ / Contrast / Brightness / Sharpness / Color / Tint
Your television has several setting options that allow you to control the picture quality.
Backlight
● : Adjusts the brightness of LCD back light.
Contrast ● : Adjusts the contrast level of the picture.
Brightness ● : Adjusts the brightness level of the picture
Sharpness ● : Adjusts the edge denition of the picture.
Color ● : Adjusts color saturation of the picture.
Tint ● : Adjusts the color tint of the picture.
When you make changes to “ N Backlight”, “Contrast”, “Brightness”, “Sharpness” “Color”or “Tint
(G/R)” the OSD will be adjusted accordingly.
Settings can be adjusted and stored for each external device you have connected to an input of
N
the TV.
The energy consumed during use can be signicantly reduced if the level of Backlight is reduced,
N
and that this will reduce the overall running cost.
Picture Options ❑
In PC mode, you can only make changes to the “ N Color
Tone” and “Size” from among the items in “Picture
Options”.
Color Tone
→Cool / Normal / Warm1 / Warm2
Size
Occasionally, you may want to change the size of the image on
your screen. Your TV comes with six screen size options, each
designed to work best with specic types of video input. Your
satellite receiver may have its own set of screen sizes as well. In general, though, you should view
the TV in 16:9 mode as much as possible.
Alternately, you can press the
O P.SIZE button on the remote control repeatedly to change the
picture size.
16:9
● : Sets the picture to 16:9 wide mode.
Zoom1 ● : Magnies the size of the picture on the screen.
Zoom2 ● : Magnies the size of the picture more than “Zoom1”.
Wide Fit ● : Enlarges the aspect ratio of the picture to t the entire screen.
4:3 ● : Sets the picture to 4:3 normal mode.
Screen Fit: Use the function to see the full image without any cutoff when HDMI ●
(720p/1080i/1080p), Component (1080i/1080p) or DTV (1080i) signals are input.
Mode :Standard ►
Backlight : 8
Contrast : 95
Brightness : 45
Sharpness : 50
Color : 50
Tint (G/R) : G50/R50
Picture
Picture Options
Color Tone : Normal ►
Size : 16:9
Digital NR : Auto
HDMI Black Level : Normal
Film Mode : Off
U
Move
E
Enter
R
Return