Filter
Top Products
CPU RAM Ethernet OS Application
Recommended P3.0 GHz 512 M 100 M / 1
G
Windows
XP
WMP 9 or
later
PowerSaver
This PDP Display has a built-in power management system called PowerSaver. This system
saves energy by switching your PDP Display to low-power mode when it has not been used
for a certain amount of time. The PDP Display automatically returns to normal operation when
you press a key on the keyboard. For energy conservation, turn your PDP Display OFF when
it is not needed, or when leaving it unattended for long periods. The PowerSaver system
operates with a VESA DPM compliant video card installed in your computer. Use the software
utility installed on your computer to set up this feature.
PowerSaver (When used as a Network PDP Display)
State Normal Opera-
tion
Power saving
mode
Power off
EPA/ENERGY
2000
Power Indicator Green Green, Blink-
ing
Red
Power Consump-
tion
P50F(N) 550 W Less than5
watts
Less than5
watts
P63F(N) 750 W
PowerSaver (When used as a normal PDP Display)
State Normal Opera-
tion
Power saving
mode
Power off
EPA/ENERGY
2000
Power Indicator Green Green, Blink-
ing
Red
Power Consump-
tion
P50F(N) 550 W Less than2
watts
Less than2
watts
P63F(N) 750 W
Preset Timing Modes
If the signal transferred from the computer is the same as the following Preset Timing Modes,
the screen will be adjusted automatically. However, if the signal differs, the screen may go
blank while the power LED is on. Refer to the video card manual and adjusts the screen as
follows.
Display Mode Horizontal
Frequency
(kHz)
Vertical Fre-
quency (Hz)
Pixel Clock
(MHz)
Sync Polarity
(H/V)
IBM, 640 x 350 31.469 70.086 25.175 +/-
IBM, 640 x 480 31.469 59.940 25.175 -/-
IBM, 720 x 400 31.469 70.087 28.322 -/+
MAC, 640 x 480 35.000 66.667 30.240 -/-
MAC, 832 x 624 49.726 74.551 57.284 -/-
MAC, 1152 x 870 68.681 75.062 100.000 -/-
Specifications