Filter
Top Products
Chapter Three
O
PERATION
Adjusting Basic Convergence
If the color appears spread out or “smeared” on the screen, the convergence probably needs
alignment. Be sure to use the remote control for the convergence adjustments. (The
Convergence Adjustment cannot be made by using the control buttons on the front panel.)
First steps:
1
Press MENU.
Press CH ▼ twice to
highlight the Setup icon
(starts blinking).
2
Press VOL +.
Press CH ▼ three times to
highlight “Convergence”
(the letters change to
blue color).
Turning the TV On and Off
Press POWER.
You can also use the POWER button on the front panel.
CHAPTER THREE: OPERATION 3.1
continued...
3
Press VOL + : The
“Manual Convergence”
screen will appear, and
the word “Red” will be
highlighted.
00583F(E)-CHAPTER 3 7/19/05 2:32 PM Page 1