Filter
Top Products
English - 16
Operation
Turning the TV On and Off
Press the POWER button on the remote control.
You can also use the POWER button on the TV.
➢
It may take a while before you see a full picture.
Plug & Play Feature
When the TV is initially powered On, basic settings proceed automatically and subsequently:
➢
The Screen Saver is activated if there is no operating signal for longer than 15 minutes.
1 Press the POWER button on the remote control.
The message Menu language, Store Demo, Channels and Time will be set.
is displayed.
2 Press the ENTER button to enter the language.
Press the ▲ or ▼ button to select language, then press the ENTER button.
The message Select “Home Use” when installing this TV in your home. is
automatically displayed.
3 Press the ◄ or ► button to select Store Demo or Home Use, then press the
ENTER button.
➢
We recommend setting the TV to Home Use mode for the best picture in
your home environment.
➢
Store Demo mode is only intended for use in retail environments.
➢
If the unit is accidentally set to Store Demo mode and you want to return to
Home Use (Standard) : Press the Volume button. While the volume OSD is
displayed, press and hold the MENU button for 5 seconds.
➢
The Screen Saver is activated if there is no remote control key input for
longer than 1 minute while Plug & Play is running.
4
Press the ▲ or ▼ button to memorize the channels of the selected connection.
Press the ENTER button to select Start.
➢
Air : Air antenna signal.
Cable : Cable antenna signal.
Auto : Air and Cable antenna signals.
➢
In Cable mode, you can select the correct analog signal source among
STD, HRC, and IRC by pressing the ◄ or ► button, then press the ENTER
button. If you have Digital cable, select the signal source for both Analog and
Digital. Contact your local cable company to identify the type of cable system
that exists in your particular area.
Continued...
Select “Home Use” when installing this TV in your
home.
Plug & Play
Store Demo
Home Use
Enter
Move
Select the language of the OSD.
L
anguage :
Plug & Play
English
Español
Français
Enter
Move
Menu language, Store Demo,
Channels and Time will be set.
i
Start
Enter
Plug & Play
Select the antenna to memorize.
A
ir
Cable
Auto
Plug & Play
Start
Start
Enter
Skip
Move
Start
Plug & Play
Enter
Skip
Move
Selects a cable signal type for your location.
Start
STD
HRC
IRC
Analog
STD
HRC
IRC
Digital
BN68-01762A.indd 16 2008-07-14 오후 11:07:05