Samsung PN50B550T2F Flat Panel Television User Manual


 
Remote Control
You can use the remote control up to a distance of about 23 feet from the TV.
The product color and shape may vary depending on the model.
The performance of the remote control may be affected by bright light.
N
N
1
POWER
Turns the TV on and off.
2
TV
Selects the TV mode directly.
3
NUMERIC BUTTONS
Press to change the channel.
4
Press to select additional channels (digital
and analog) being broadcast by the same
station. For example, to select channel
“54-3”, press “54”, then press “ ” and “3”.
5
M
MUTE
Press to temporarily cut off the sound.
6
VOL
Press to increase or decrease the volume.
7
SOURCE
Press to display and select the available
video sources.
8
CH LIST
Used to display Channel Lists on the screen.
9
TOOLS
Use to quickly select frequently used
functions.
0
UP▲/DOWN▼/LEFT◄/
RIGHT►/ENTER
Use to select on-screen menu items and
change menu values.
!
INFO
Press to display information on the TV
screen.
@
COLOR BUTTONS
Use these buttons in the Channel list and
Media Play function.
#
MEDIA.P (Media play)
This function enables you to view and play
photo and music les from an external
device. (Refer to pages 38 (Photo) and 41
(Music))
$
P.MODE
Press to select the picture mode.
%
Use these buttons in the DMA, Media Play
and Anynet+ modes.
( : This remote can be used to control
recording on Samsung recorders with the
Anynet+ feature)
^
ON/OFF
Press to backlight the buttons on the remote.
This function is convenient for using at night
or when the room is dark. (Using the remote
control with the light button set to On will
reduce the battery usage time.)
&
PRE-CH
Tunes to the previous channel.
*
CH
Press to change channels.
(
MENU
Displays the on-screen menu.
)
FAV.CH
Press to switch to your favorite channels.
a
RETURN
Returns to the previous menu.
b
EXIT
Press to exit the menu.
c
P.SIZE
Picture size selection.
d
SRS
Selects SRS TruSurround HD mode.
e
CC
Controls the caption decoder.
f
MTS
Press to choose stereo, mono or Separate
Audio Program (SAP broadcast).
Installing Batteries in the Remote Control
1. Lift the cover at the back of the remote control upward as shown in the gure.
2. Install two AAA size batteries.
Make sure to match the “+” and “–” ends of the batteries with the diagram inside the compartment.
3. Close the cover as shown in the gure.
Remove the batteries and store them in a cool, dry place if you won’t be using the remote control for a
long time. (Assuming typical TV usage, the batteries should last for about one year.)
Using the remote control with the ON/OFF( ) light button set to On will reduce the battery usage
time.
If the remote control doesn’t work, check the following
1. Is the TV power on?
2. Are the plus and minus ends of the batteries reversed?
3. Are the batteries drained?
4. Is there a power outage or is the power cord unplugged?
5. Is there a special uorescent light or neon sign nearby?
N
N
N
N
English - 9
BN68-01917A.indb 9 2009-02-13 오후 11:07:46