Samsung PN58A550S1F Flat Panel Television User Manual


 
English - 8
Press the POWER button on the remote control.
The TV will be turned on and you will be able to use its
features. You can also use the Power button on the front of
the TV
➢
If your TV isn’t turned on when the Power button is
pressed: Press the TV button to check if the TV mode
has been chosen.
Turning the TV On and Off
Your TV has a simple, easy-to-use menu system that appears
on the screen. This system makes it convenient and fast to
use the TV’s features.
The TV also displays the status of many features.
Viewing the Menus and Displays
Viewing the Menus
1
With the power on, press the MENU button.
The main menu appears on the screen. The menu’s
left side has icons: Picture, Sound, Channel,
Setup, Input, Application.
2
Pressthe▲or▼buttontoselectoneoftheicons.
Then press the ENTER button to access the icon’s
sub-menu.from the menu.
Press the EXIT button to exit.
➢
It takes about one minute until the on-screen menu
disappears.
Displaying Status Information
Press the INFO button on the remote control.
The TV will display the channel, the type of sound, and the
status of certain picture and sound settings.
➢
The information window automatically disappears
after a few seconds. Press the INFO button once to
manually close the window.
Memorizing the Channels
Selecting the Video Signal-source
Before your television can begin memorizing the available
channels, you must specify the type of signal source that is
connected to the TV(i.e., an air or a cable system).
1
Press the MENU button to display the menu.
Pressthe▲or▼buttontoselect
Channel, then
press the ENTER button.
2
Press the ENTER button to select Antenna.
Pressthe▲or▼buttontoselect
Air or Cable,
then press the ENTER button. Press the EXIT
button to exit.
Mode : Standard
Cell Light : 7
Contrast : 90
Brightness : 45
Sharpness : 50
Color : 50
Tint (G/R) : G50/R50
Detailed Settings
Picture
TV #1
Sun, Sep 3 1:45 pm
M. Spillane’s Mike Hammer
Bonocrunch
DTV Air
13-1
Dolby Digital
480i 4:3 English
12:59 pm - 1:59 pm
Antenna
:
Air
Auto Program
Channel List
Clear Scrambled Channel
Fine Tune
Signal Strength
Air
Cable
Channel
Continued...
Storing Channels in Memory (Automatic Method)
1
Press the MENU button to display the menu.
Pressthe▲or▼buttontoselect
Channel, then
press the ENTER button.
2
Pressthe▲or▼buttontoselectAuto Program,
then press the ENTER button.
3
Press the button to select an antenna connection,
then press the ENTER button.
Air: Air antenna signal.
Cable: Cable antenna signal.
Auto: Air and Cable antenna signals.
Channel
Antenna : Air
Auto Program
Channel List
Clear Scrambled Channel
Fine Tune
Signal Strength
ReturnEnter
Auto Program
Select the antennas to memorize.
Air
Cable
Auto
Move
Start
Start
Start
BN68-01363C-00Eng.indd 8 2008-02-13 오전 2:25:50