Filter
Top Products
You must insert or replace the batteries in the remote control when
you:
◆ Purchase the television
◆ Find that the remote control is no longer operating
correctly
1 Remove the cover on the rear of the remote control by pressing
the symbol ( ) upwards and then pulling firmly to remove it.
2 Insert two R03, UM4, “AAA” 1.5V or equivalent batteries taking
care to respect the polarities:
◆
-
on the battery against
-
on the remote control
◆
+
on the battery against
+
on the remote control
3 Replace the cover by aligning it with the base of the remote
control and pressing it back into place.
➢
Do not mix battery types, i.e. alkaline and manganese.
➢
The light function on the remote control consumes a large
amount of battery power.
Using this function frequently will shorten the battery life time
considerably.
Inserting the Batteries in the Remote Control
Assembling the Stand-Base
1 Assemble the PDP with the stand and firmly secure the PDP using
4 screws provided.
➢
Two or more people should carry the PDP. Never lay the
PDP on the floor because of possible damage to the screen.
Always store the PDP upright.
English - 9
C,
BN68-00973A-00Eng 9/28/05 4:22 PM Page 9