Samsung DVD-C600 DVD Player User Manual


 
37
REFERENCE
36
Specifications
*: Nominal specification
2 Channel
*Frequency Response
*S/N Ratio
*Dynamic Range
*Total Harmonic Distortion
S-VIDEO
Composite Video
Component Video
VCD : 5"
CD : 3
1/2"
(COMPACT DISC)
CD : 5"
(COMPACT DISC)
DVD
(DIGITAL VERSATILE DISC)
Operating Temperature Range
Operating Humidity Range
Dimensions
Weight
Power Consumption
Power Requirements
AC 120 V, 60 Hz
20 W
15.4 lbs
W 16.9 in x D 16.1 in x H 4.3 in
+41°F to +95°F
10 % to 75 %
Reading Speed : 11.45 ft/sec
.
Approx. Play Time
(Single Sided, Single Layer Disc) : 135 min.
Reading Speed : 3.9 to 4.6 ft/sec.
Maximum Play Time : 74 min.
Reading Speed : 3.9 to 4.6 ft/sec.
Maximum Play Time : 20 min.
Reading Speed : 3.9 to 4.6 ft/sec.
Maximum Play Time : 74 min. (Video + Audio)
2 channel : 1.0 Vp-p (75 load)
Y : 1.0 Vp-p (75 load)
Pr : 0.70 Vp-p (75 load)
Pb : 0.70 Vp-p (75 load)
Luminance Signal : 1.0 Vp-p (75 load)
Chrominance Signal : 0.286 Vp-p (75 load)
L(1/L), R(2/R)
48 kHz Sampling : 4 Hz to 22 kHz
96 kHz Sampling : 4 Hz to 44 kHz
110 dB
100 dB
0.003 %
General
Disc
Video
Output
Audio
Output
• Samsung Electronics Co., Ltd reserves the right to change the specifications without
notice.
• Weight and dimensions are approximate.
Troubleshooting Guide
Before requesting service (troubleshooting)
No operations can be
performed with remote.
The screen ratio cannot be changed.
No audio.
Playback mode differs
from the Setup Menu
selection.
Disc Menu doesn’t appear.
The icon appears on
screen.
Forgot password
If you experience other
problems.
5.1 channel sound is not
being reproduced.
Disc does not play.
• Check the batteries in the remote. May need replacing.
• Operate the remote control at a distance of no more than 20
feet.
• Remove batteries and hold down one or more buttons for
several minutes to drain the microprocessor inside the
remote to reset it. Reinstall batteries and try remote again.
• Ensure that the disc is installed with the label side facing up.
• Check the region number of the DVD.
• This player cannot play CD-ROMs, DVD-ROMs, etc. Insert a
DVD, a VIDEO-CD or a CD.
• 5.1 channel sound is reproduced only when the following
conditions are met. :
1)The DVD player is connected with the proper amplifier
2)The disc is recorded with 5.1 channel sound.
• Check whether the disc being played has the “Dolby 5.1 ch”
mark on the outside.
• Check if your audio system is connected and working properly.
• The features or action cannot be completed at this time
because:
1. The DVD’s software restricts it.
2. The DVD’s software doesn’t support the feature (e.g., angles).
3. The feature is not available at the moment.
4.You’ve requested a title or chapter number or search time
that is out of range.
• Check if the disc has a Menu.
• Some of the functions selected in the Setup Menu may not
work properly if the disc is not encoded with the correspond-
ing function.
• The Screen Ratio is fixed on your DVDs.
• Make sure you have selected the correct Digital Output in
the Audio Options Menu.
Press Power On from a “Cold Start” with no disc in the unit.
Press the STOP and PLAY buttons simultaneously on the front
panel for three seconds.The Select Menu Language display will
appear. Select the desired language button. Press the SETUP
button on the remote control to select the Parental Mode.
The Parental Mode is now unlocked as indicated on the display.
Press the DOWN button to select Parental.
You can now set your Rating Level and change your password
to a new number.
• Go to the contents and find the section of the instruction
book that contains the explanations regarding the current
problem, and follow the procedure once again.
• If the problem still cannot be solved, please contact your
nearest authorized service center.
Action
Problem
Page
P4
P8
P14-15
P19-22
P25-29
P24-25
P29-34
P34
P33
P32