Filter
Top Products
ENG-54
CHANGING S
ETUP MENU
Black Level :Off
Sharpness :Level 3
Brightness :Level 3
Color Saturation : Level 3
PICTURE QUALITY
ˆ HDMI
This setting is used when the unit is
connected by HDMI or DVI to Display
devices (TV, Projector, etc.).
- Resolution Setting
•
Auto : Resolution setting automatically
•
Manual : Resolution setting manually
- Resolution
•
480p : 720 x 480
•
720p : 1280 x 720
•
768p : 1024 x 768
•
1080i : 1920 x 1080
- Format
You can use this function to set HDMI or
DVI output's digital data RGB range.
•
RGB-Normal : HDMI/DVI Limited range
RGB data output. This
should be used for TVs.
•
RGB-Expand : HDMI/DVI Full range RGB
data output. This should be
used for PC Monitors.
•
YCbCr-(4:4:4) : HDMI Limited range
YCbCr-(4:4:4) output.
•
YCbCr-(4:2:2) : HDMI Limited range
YCbCr-(4:2:2) output.
If you set the HDMI output resolution to
768p, you cannot use YCbCr format.
Limited range - Black/White and color level
are displayed within a Limited data range.
ex) When the bit depth is 8 bits
- Y : 16~235 - levels of brightness
- CbCr : 16~240 - levels of color
Full range - Black/White and color level are
expressed within full data range.
ex) When the bit depth is 8 bits
- Y : 0~255 - levels of brightness
- CbCr : 0~255 - levels of color
- DVI Output
You can use this function to set HDMI to
DVI output format.
When the HDMI to DVI cable is plugged into
a TV, you can select either Mode A or Mode
B to set up the DVI output.
•
This function corrects a TV screen when it
is not centered to secure a normal view.
•
If HDMI to DVI Output is set incorrectly,
the screen can be biased.
Ø Picture Quality
- Black Level : Adjusts the brightness of the
screen. (On or Off) It does not operate in
Progressive scan mode.
- Sharpness : Level 1 ~ Level 5
- Brightness : Level 1 ~ Level 5
- Color Saturation : Level 1 ~ Level 5
- Color Saturation is only available through
the analog outputs.
It is not possible to adjust the Color
Saturation in HDMI Mode.
• Consult your TV User’s Manual to find
out if your TV supports Progressive Scan.
If Progressive Scan is supported, follow
the TV User’s Manual regarding
Progressive Scan settings in the TV’s
menu system.
• If Video Output is set incorrectly, the
screen may be distorted.
• The resolutions available for HDMI output
depend on the connected TV or projector.
For details, see the user’s manual of your
TV or projector.
• When the resolution is changed during
playback, it may take a few seconds for a
normal image to appear.
• If you set the HDMI output resolution to
720p or 1080i, HDMI output provides
better picture quality.
Resolution Setting : Auto
Resolution : 720p
Format : RGB-Normal
HDMI SETUP
00846A-HD755-XAA-2 6/27/05 2:54 PM Page 54