Filter
Top Products
ENGLISH
26
ENGLISH
Using the battery pack
Important!
•
When inserting the battery pack, make sure that it is inserted correctly.
Otherwise, your DVD player may malfunction.
Use the AC adapter (included) to charge the battery pack.
•
Before charging, make sure that the battery pack is correctly seated.
1. Connect the AC cord to the jack on the AC adapter ( ).
2. Connect the DC cord to the DC IN jack on the left side of the DVD player ( ).
3. Plug the other end of the AC cord into an AC outlet ( ).
Charging the battery pack
Power Charge Lamp
-Green light will flash while charging.
-When the battery pack is fully charged, the light will stop blinking and remains green.
Blinking time Charging rate
Once per second Less than 50%
Twice per second 50%~75%
Three times per second 75%~90%
Blinking stops and stays on 90%~100%
On for a second and Error-Reset the battery pack and
off for a second the DC cable
2
1
3
1
2
3