Filter
Top Products
12
Setup
Description-Rear Panel
Rear Panel
ΠANTENNA TERMINALS
Two independent cables or antennas can
be connected to these terminals.
Input: Use IN terminal to receive a signal
from VHF/UHF antennas or your cable
system.
Output: Use the OUT terminal to send
the signal being received by the IN termi-
nal out to another component.
´ S-VIDEO INPUT JACKS
Use the S-video cable to connect this jack
to the S-Video output jack on your VCR,
camcorder or other component for a high-
er quality picture.
ˇ VIDEO INPUT JACKS
Use the video cable to connect to the
video output jack on your VCR, camcorder
or other component.
¨ AUDIO INPUT JACKS
Use the audio cable to connect to the
audio output jack on your VCR, cam-
corder or other component.
ˆ S-VIDEO OUT JACKS
If your TV has an S-Video input jack, you
can connect an S-Video cable for
increased video quality.
Ø VIDEO OUT JACKS
Use a video cable to connect to the Video
input jack on your TV.
∏ AUDIO OUT JACKS
Use an audio cable to connect to the
audio input jack on your TV or Receiver.