Filter
Top Products
34
OPERATION
Memorizing the Channels
Your TV can memorize and store all of the available channels for both “off-air”
(antenna) and cable channels. After the available channels are memorized, use the
CH and CH buttons to scan through the channels. This eliminates the need
to change channels by entering the channel digits. There are three steps for memo-
rizing channels: selecting a broadcast source, memorizing the channels (automatic)
and adding and deleting channels (manual).
Selecting the Video Signal-source
Before your television can begin memorizing the available channels, you must
specify the type of signal source that is connected to the TV (i.e., an antenna or
a cable system).
1
Press the MENU button.
Press the ▼ button to
select “Channel”, then
press the ENTER button.
2
Press the ENTER button
to select “Select
Antenna”, then press the
ENTER button.
Press the ▼ button to
select “Air” or “Cable”,
then press the ENTER
button.
Select Antenna : Air
Select Favorite Channels
Memorize Channels
Add & Delete Channels
Fine Tune Channels
Check Signal Strenght
Select Antenna : Air
Select Favorite Channels
Memorize Channels
Add & Delete Channels
Fine Tune Channels
Check Signal Strenght
T V Channel
T V Channel
3
Press the ▼ button to
select “Memorize
Channels”, then press
the ENTER button.
Select Antenna : Air
Select Favorite Channels
Memorize Channels
Add & Delete Channels
Fine Tune Channels
Check Signal Strenght
T V Channel
Air
Cable