Filter
Top Products
English - 45
Viewing an External Signal Source
Use the remote control to switch between viewing signals from connected equipment,
such as a VCR, DVD, Set-Top Box or the TV source (broadcast or cable).
Setting the Signal Source
1
Press the MENU button.
Press the ENTER button to select
“Input”.
2
Press the … or † button to select
“Source List”, then press the ENTER
button.
Press the … or † button to select a
signal source, then press the ENTER
button.
Alternate method
Press the SOURCE button on the
remote control repeatedly to
select an external signal source.
NOTES
• Only connected devices can be selected.
• Before selecting an input source, make sure the corresponding
external device is connected first.
• HDMI input can be selected only when the external device is
turned on and connected to the TV.
• When you connect equipment to
the TV, you can choose between
the following sets of jacks:
“AV1”, “AV2”, “S-VIDEO1”,
“S-VIDEO2”, “COMPONENT1”, “COMPONENT2”, “PC”,
“HDMI1”, or “HDMI2” on the TV’s rear panel and “AV3” on
the TV’s side panel.
Input
Enter
Input
Source List
Edit Name
TV
Return
Input
Enter
Source List
TV
√
AV1
AV2
AV3
S-Video1
S-Video2
Component1
Component2
†
PC
----
----
----
----
----
----
----
----
Return
AV1
BP68-00588A-03Eng(028~055) 8/22/06 5:14 PM Page 45