Filter
Top Products
Connecting a Camcorder
The side panel jacks on your TV make it easy to connect a Camcorder to your TV.
You can use your camcorder to view tapes without using a VCR.
1
Locate the A/V output jacks
on the camcorder. They are
usually found on the side or
back of the camcorder.
2
Connect a video or S-Video
cable between the VIDEO IN
(or S-VIDEO IN) jack on
the TV and the VIDEO (or
S-VIDEO) output jack on the
Camcorder.
The audio-video cables shown
here are usually included with
a Camcorder. (If not, check
your local electronics store.)
If your Camcorder is stereo,
you need to connect a set of
two cables.
3
Connect a set of audio
cables between the AUDIO
IN jacks on the TV and the
AUDIO output jacks on the
camcorder. If you have a
mono Camcorder, connect
L(mono) to the Camcorder
audio out using only one
audio cable.
NOTE
• Please be sure to match the
color coded input terminals
and cable jacks.
English - 23
Camcorder
Output Jacks
1
TV Rear and right side
or
Camcorder
3
2
BP68-00588H-01Eng(018~031) 5/16/06 11:35 AM Page 23