Filter
Top Products
Operation
English - 36
4
Press the œ or √ button to select the Antenna connection,
then press the ENTER button.
When selecting Cable TV system:
Press the ENTER button to start the auto program.
By default, the cable TV system is set to “STD”.
If you want to select another type of cable system, press the
œ or √ button to select Analog or Digital “STD”, “HRC” or
“IRC”.
5
Press the ENTER button to start the auto program.
The TV begins memorizing all available stations.
Press the ENTER button at any time to interrupt the
memorization process.
Select “Return” by pressing the
… or † button, then press
the ENTER button to return to the previous menu.
Press the EXIT button to exit.
• Air : “Air” antenna signal
Cable : “Cable” antenna signal
Air+Cable : “Air” and “Cable” antenna signals
• If a CableCARD is inserted into the “CableCARD” slot on
the rear panel, “Cable” and “Air+Cable” are not available.
• STD, HRC and IRC identify various types of cable TV
systems. Contact your local cable company to identify the
type of cable system that exists in your particular area.
At this point the signal source has been selected.
• The TV must be connected to an air/cable in order to
receive digital TV signals. Even if a particular channel
is deleted from the memory, you can always tune to that
channel directly by using the number buttons on the
remote control.
•When connecting Digital Cable to a Set-Top Box,
Channel Memorization is done on the STB.
To view the STB on your TV, select the Input jack the
STB is connected to with the SOURCE button on the
TV’s remote. (see page 49)
NOTES
• All available DTV and analog channels are automatically stored in memory.
•When a Cable card is inserted, you do not need to save channels.
Auto Program
Select the antennas to Memorize
Air Cable Air+Cable
Auto Program
Select the cable system.
Analog
STD HRC IRC
Digital
STD HRC IRC
Move Enter Return
Move Enter Return
Auto Program
Select the cable system.
Analog
STD HRC IRC
Digital
STD HRC IRC
Move Enter Return
Auto Program
Auto Program in progress.
Cable 3
85%
Stop
Enter Return
Auto Program
Auto Program is incomplete.
8 channels were memorized.
Air : 7. Cable : 1
OK
Enter Return
BP68-00588H-01Eng(032~059) 5/16/06 11:38 AM Page 36