Filter
Top Products
63
Selecting an External Signal
You can use PIP to view a signal from an external source, such as a VCR.
1
Press the Menu button. Move
the joystick down to select
PIP, then press the joystick to
enter. Quick way to access PIP
source: Just press “Source” on
the remote control.
2
Move the joystick down to
select “Source”.
3
Move the joystick right or left
to select an external signal.
You can choose between
“TV”, “Video 1~3”, or
“S-Video 1~3”.
The signal from these inputs will not appear if you have
not connected any equipment to the TV’s input jacks.
For more information about external signals, see
“Viewing an External Signal Source” (See page 41).
If you select “TV.” the PIP image is the same as the
main image.
4
Press Menu to exit.
NOTE
• The PIP subscreen doesn’t support ANT-B, Component1, Component2, Component3, PC, and
DVI.
BP68-00030A-4 4/15/05 8:34 PM Page 63