Filter
Top Products
4.5 CHAPTER FOUR:SPECIAL FEATURES
SPECIAL FEATURES
Special Sound Options
Choosing a Multi-Channel Sound (MTS) Soundtrack
Depending on the particular program being broadcast, you can listen to stereo, mono, or
a Separate Audio Program. (SAP audio is usually a foreign-language translation. Some-
times SAP has unrelated information like news or weather.)
2
Press the CH▼ button
three times to select
“MTS”.
Sound
Move Select
Menu
Mode Custom
Equalizer
Virtual Dolby : Off
Auto Volume : Off
MTS Setting : Manual
MTS Mono
Headphone
Sound Select Main
3
Press the VOL + button
repeatedly to select
“Mono,” “SAP,” or
“Stereo.”
Press the MENU button to
exit
Sound
Move Select
Menu
Mode Custom
Equalizer
Virtual Dolby : Off
Auto Volume : Off
MTS Setting : Manual
MTS Stereo
Headphone
Sound Select Main
▼
The text at the bottom of the
menu tells you if the incoming
audio is stereo, SAP, or mono.
1
Press the MENU button to
display the menu.
Press the CH▼ button to
select “Sound”, then
press the VOL + button
Sound
Move Select
Menu
Mode Custom
Equalizer
Virtual Dolby : Off
Auto Volume : Off
MTS Setting : Manual
MTS Mono
Headphone
Sound Select Main
• Choose Stereo for channels that are broadcasting in stereo.
• Choose Mono for channels that are broadcasting in mono, or if you are
having difficulty receiving a stereo signal.
• Choose SAP to listen to the Separate Audio Program, which is usually a
foreign-language translation.
You can also change the MTS setting by pressing the “MTS” button on the remote
control. (When you change channels, MTS is set to “Stereo” automatically.
To listen in ‘SAP’ or ‘Mono,’ change the MTS setting.)