Filter
Top Products
8
Setting up Your LCD TV
Setting up an Ergonomic
Workstation
Consider the advice given below before you install
your LCD TV.
LCD TV location
Choose a position that exposes your LCD TV to the
least reflection from lights or windows, usually at a
right angle to any window.
Workstation height
Place your LCD TV so that the top of the screen is
slightly below your eye level when
you are comfortably seated.
Viewing angle
Tilt the screen until you feel comfortable working
with your LCD TV.
➣
The maximum tilt angle is 15 degrees in the
backward direction. Please do not tilt the LCD
TV beyond the specified range.
Tilting the LCD TV beyond the specified range
may cause permanent damage to the
mechanical part of the stand.
Plug and Play
The adoption of the new VESA
®
Plug and Play
solution eliminates complicated and time consuming
setup. It allows you to install your LCD TV in a Plug
and Play compatible system without the usual
hassles and confusion. Your PC system can easily
identify and configure itself for use with your display.
This LCD TV automatically tells the PC system its
Extended Display Identification Data (EDID), using
Display Data Channel (DDC) protocols, so the PC
system can automatically configure itself to use the
flat panel display. If your PC system needs a monitor
driver, follow the instructions given below according
to the operating system your computer uses.
Installing the Monitor Driver
The CD that accompanies this product contains the
necessary drivers for installing your LCD TV. Please
refer to the driver installation instructions included
with your CD package for more information.