Filter
Top Products
9
Setting up Your LCD TV
Self-Test Feature Check (STFC)
Your LCD TV provides a self-test feature that allows
you to check whether your LCD TV is
functioning properly. Make sure that PC is selected
as a primary source by checking if the source
indicator LED labeled “PC” is on. If your LCD TV and
computer are properly connected but the LCD TV
screen remains dark and the power indicator is
blinking, run the LCD TV self-test by following the
steps:
1
Turn off both your computer and the LCD TV.
2
Unplug the video cable from the back of the
computer.
3
Turn on the LCD TV.
If the LCD TV is functioning properly, you will
see a white box with a large blue oval Samsung
logo and an error message : Check Signal Cable.
This box also appears during normal operation if
the video cable becomes disconnected or
damaged.
4
Turn off your LCD TV and reconnect the video
cable; then turn on both your computer and the
LCD TV.
If your LCD TV screen remains blank after
following the previous procedure, check your
video controller and computer system; your LCD
TV is functioning properly.
Getting Help
If your LCD TV does not display an image, check your
cable connections and refer to “Troubleshooting” on
page 29. If you experience difficulties with the quality
of the displayed image, press the
Auto button (see
page 13).
Warm-up Time
All LCD TV need time to become thermally stable
when turned after being off for a couple of hours.
Therefore, to achieve more accurate adjustments for
parameters, allow the LCD TV to warm up for at least
20 minutes before making any screen adjustments.
Check Signal Cable
Power Indicator