Viewing the Picture-in-Picture
29
Selecting an External Signal
You can use PIP to view a signal from an external source, such as a VCR.
1
Press the Menu button. Move the joystick up or
down to select “PIP”, then press the joystick to
enter.
2
Move the joystick up or down to select “Source”.
3
Move the joystick left or right to select “Video”.
You will also see the items “Video” and “S-Video”.
The signal from these inputs will not appear if you
have not connected any equipment to the PDP’s
input jacks.
4
Press the Menu button to exit.
PIP
Move Select Exit
Source Video
Swap
Size Large
Locate
Select On
PIP
Move Select Exit
Source Video
Swap
Size Large
Locate
Select On
PIP
Move Select Exit
Source S-Video
Swap
Size Large
Locate
Select On
28
Selecting the PIP Screen
1
Press the Menu button. Move the joystick up or down to
select “PIP”, then press the joystick to enter.
2
Move the joystick left or right to select “On”.
The PIP image will appear in the corner of the screen.
3
Press the Menu button to exit.
Note
• The PIP function not operates in Component mode.
PIP
Select Off
Move Enter Exit
PIP
Move Select Exit
Source Video
Swap
Size Large
Locate
Select On
Quick way to access the PIP: Just press “PIP”
on the remote control.
!
Quick way to access the PIP source: Just press
“Source” in the cover on the remote control.
!