37
ENG
You can use the Fan if you are anxious for the PDP.
1 Press the MENU button.
Result
: The main menu is displayed.
2 Press the ▲ or ▼ button to select Function.
Result
: The options available in the Function group are
displayed.
3 Press the √ button.
4 Press the ▲ or ▼ button to select Selectable Fan.
5 Press the œ or √ button to change the setting (On or Off).
➣
◆ If your PDP is displayed vertically, the fan
automatically works.
◆ The message Check Fan is displayed if there is a fan
problem.
◆ Please use the fan when the temperature is over 35
degrees.
Tu rning On the Fan
Language English
Time
√√
Selectable Fan
œœ
Off
√√
Film Mode
œœ
Off
√√
Function
Move Sel. Return
When a video input source is from a film such as movies, this feature
identifies the source and changes to the corresponding screen.
1 Press the MENU button.
Result
: The main menu is displayed.
2 Press the ▲ or ▼ button to select Function.
Result
: The options available in the
Function group are
displayed.
3 Press the √ button.
4 Press the ▲ or ▼ button to select Film Mode.
5 Press the œ or √ button to change the setting (On or Off).
➣
◆ If video source is not film, set to Off.
◆ Available in Video, S-Video, and Component (480i)
modes.
Setting the Film Mode
Language English
Time
√√
Selectable Fan
œœ
Off
√√
Film Mode
œœ
Off
√√
Function
Move Sel. Return
BN68-00457B-01_ENG 2003.10.23 3:21 PM Page 37