15
When you start using your PDP for the first time, you must select the
language which will be used for displaying menus and indications.
1 Press the MENU button.
Result
: The main menu is displayed.
2 Press the ▲ or ▼ button to select Function.
Result
: The options available in the
Function group are
displayed.
3 Press the √ button.
Result
: The Language option is selected.
4 Press the √ button again.
Result
: The languages available are listed.
5 Select the appropriate language by pressing the ▲ or ▼ button
repeatedly.
6 Press the button to confirm your choice.
Choosing Your Language
ENG
The mains lead is attached to the rear of your PDP.
1 Plug the mains lead into an appropriate socket.
Result
: The Standby indicator on the front of the PDP lights up.
➢
The main voltage is indicated on the rear of the PDP and
the frequency is 50 or 60Hz.
2 Press the “ I / ” button on the front of the PDP (or ON ()
button on the remote control) to switch the PDP on.
3 To switch your PDP off, press the “ I / ” button again (or OFF
() button on the remote control).
Front of the PDP
Switching On and Off
English
Français
Deutsch
Italiano
Español
Language
Sel. Store
Language English
Time
√√
Selectable Fan
œœ
Off
√√
Film Mode
œœ
Off
√√
Function
Move Enter Return
BN68-00654A-03Eng 6/24/04 4:53 PM Page 15