17
ENG
Your PDP has several settings which allow you to control picture
quality.
1 Press the MENU button.
Result
: The options available in the Picture group are
displayed.
2 Press the √ button.
3 Press the ▲ or ▼ button to select Adjust. Press the √ button.
Result
: The Adjust menu is displayed.
4 Press the ▲ or ▼ button to select the option (Contrast,
Brightness, Sharpness, Color, Tint-NTSC only) to be
adjusted. Press the
œ or √ button.
Result
: The horizontal bar is displayed. Move the horizontal
bar’s cursor left or right by pressing the
œ or √ button.
5 When you are satisfied with the settings, press the button to
store them.
6 Press the MENU button.
Result
: The options available in the Picture group are
displayed again.
7 Press the ▲ or ▼ button to select Color Tone. Select the option
by pressing the
œ or √ button. The color tones are displayed in
the following order.
Normal
-
Warm1
-
Warm2
-
Cool2
-
Cool1
➣
If you make any changes to these settings, the picture
mode is automatically switched to the
Custom.
Adjusting the Picture Settings
Mode
œœ
Dynamic
√√
Adjust
√√
Color Tone
œœ
Normal
√√
Size Wide
Digital NR
œœ
Off
√√
Picture
Move Enter Return
Adjust (Dynamic)
Contrast 100
Brightness 45
Sharpness 75
Color 55
Move Adjust Store
Mode
œœ
Dynamic
√√
Adjust
√√
Color Tone
œœ
Normal
√√
Size Wide
Digital NR
œœ
Off
√√
Picture
Move Sel. Return
BN68-00654A-01Eng 4/19/04 4:13 PM Page 17