Filter
Top Products
7
YOUR NEW TV
Rear Panel Jacks
Use the rear panel jacks to connect an A/V component that will be connected
continuously, such as a VCR or a DVD player.
Because there are two sets of input jacks, you can connect two different A/V
components (i.e., a VCR and a DVD, 2 VCRs, etc.)
For more information on connecting equipment, see pages 11-17.
Œ
AUDIO-VIDEO MONITOR
OUTPUTS
These audio-video signals are identical to A/Vsig-
nals being displayed on the big screen. (Typically
used as the input signals for a recording VCR.)
´
VIDEO INPUT
Video signals from VCRs, DVD players and similar
devices.
ˇ
AUDIO INPUTS
Audio signals from VCRs, DVD players and similar
devices.
¨
DVD AUDIO INPUTS (INPUT 2)
Use these jacks to connect the audio signals from a
DVD player when using the DVD video input jacks.
When not using the DVD jacks,these audio jacks
function as audio for Video 2 or S-VIDEO.
ˆ
S-VIDEO INPUT
Connect to an S-VHS VCR or DVD player.
Ø
DVD VIDEO INPUT
Connect video from a DVD player.
Note: Monitor Output doesn’t operate in the DVD
mode.
∏
VHF/UHF
Connect to an antenna or to a cable TVsystem.
TX-P2028
TX-P2030/TX-P2034/TX-P2036
AA03382A-00_SEA/SECA_ENG 3/10/04 2:29 PM Page 7