Filter
Top Products
77
SPECIAL FEATURES
▼
4
Enter 3 digits of the cable box code listed on the 78 page for your brand
of cable box.
Make sure you enter 3 digits of
the code, even if the first digit is a
“0”. (If more than one code listed,
try the first one.)
▼
5
Press the POWER button. Your cable box should turn on. If your cable
box turns on, your remote control is now “set up” correctly.
If your cable box does not turn
on, repeat steps 2, 3 and 4, but try
one of the other codes listed for your
particular brand of cable box.
▼
6
Once your remote control is set up, press the MODE button any time
you want to use the remote to operate your cable box.
When your remote control is
in the “CABLE” mode, the volume
buttons still control your TV’s
volume.
3
On your Samsung remote control, press the SET button.
▼
2
Press the MODE button and make sure that the CABLE LED is
illuminated.
The remote control has five
“modes”: “TV”, “STB”,“VCR”,
“Cable” and “DVD”.
Press the “MODE” button to switch
the remote control to the “Cable”
mode.
1
Turn off your cable box.
Setting Up Your Remote Control to Operate Your Cable Box