Filter
Top Products
OPERATION
3.9 CHAPTER THREE: TV OPERATION
Labeling the Channels
Use this feature to assign an easy-to-remember label to any channel (i.e., “CBS”, “ESPN”,
“PBS2”, CNN1”, etc.) A label consists of four fields, where each field is a letter, a num-
ber, “*”, or a blank. When the DISPLAY button is pressed, the channel label will appear
next to the channel number.
1
Press CH ▲ or CH ▼ to tune to
the channel that will be
labeled.
2
Press MENU to display the
menu.
Press CH ▼ twice to select
“Channel”.
Press VOL +.
3
Press CH ▼ five times to select
“Labeling”.
Press VOL + to begin labeling.
The left-most field will be high-
lighted.
(Each label has four fields. See
top paragraph.)
4
Press the CH ▲ or CH ▼ but-
ton to select a letter, a number,
“*”, or a blank. (Pressing CH ▲
results in this sequence:
A,B,...Z,*, blank,0,1,...9).
▼
Note: You cannot select
“Labeling” in the A/V mode.
5
Press VOL+ to switch to the
next field, which will be high-
lighted. Select a second letter
or digit using the CH ▲ and CH
▼ buttons, as above.
Repeat the process to select
the last two digits.
Press MENU twice to set the label and clear the menus from
the screen.